dmesg - acnas CentOS6.3 md0 disk
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 3.6.6-1.el6.elrepo.x86_64 (mockbuild@Build64R6) (gcc version 4.4.6 20120305 (Red Hat 4.4.6-4) (GCC) ) #1 SMP Tue Nov 6 16:49:39 EST 2012
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009afff] usable
BIOS-e820: [mem 0x000000000009b000-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
BIOS-e820: [mem 0x0000000020200000-0x000000003fffffff] usable
BIOS-e820: [mem 0x0000000040000000-0x00000000401fffff] reserved
BIOS-e820: [mem 0x0000000040200000-0x00000000cd89ffff] usable
BIOS-e820: [mem 0x00000000cd8a0000-0x00000000cde17fff] reserved
BIOS-e820: [mem 0x00000000cde18000-0x00000000ce097fff] ACPI NVS
BIOS-e820: [mem 0x00000000ce098000-0x00000000ce09cfff] ACPI data
BIOS-e820: [mem 0x00000000ce09d000-0x00000000ce0dffff] ACPI NVS
BIOS-e820: [mem 0x00000000ce0e0000-0x00000000ceb89fff] usable
BIOS-e820: [mem 0x00000000ceb8a000-0x00000000ceff1fff] reserved
BIOS-e820: [mem 0x00000000ceff2000-0x00000000ceffffff] usable
BIOS-e820: [mem 0x00000000cf800000-0x00000000df9fffff] reserved
BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000041f5fffff] usable
NX (Execute Disable) protection: active
DMI 2.7 present.
DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./Z77 Extreme4-M, BIOS P1.20 05/11/2012
e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0x41f600 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-D3FFF write-protect
D4000-E7FFF uncachable
E8000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask C00000000 write-back
1 base 400000000 mask FE0000000 write-back
2 base 0E0000000 mask FE0000000 uncachable
3 base 0D0000000 mask FF0000000 uncachable
4 base 0CF800000 mask FFF800000 uncachable
5 base 41F800000 mask FFF800000 uncachable
6 base 41F600000 mask FFFE00000 uncachable
7 disabled
8 disabled
9 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
original variable MTRRs
reg 0, base: 0GB, range: 16GB, type WB
reg 1, base: 16GB, range: 512MB, type WB
reg 2, base: 3584MB, range: 512MB, type UC
reg 3, base: 3328MB, range: 256MB, type UC
reg 4, base: 3320MB, range: 8MB, type UC
reg 5, base: 16888MB, range: 8MB, type UC
reg 6, base: 16886MB, range: 2MB, type UC
total RAM covered: 16110M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 16M num_reg: 9 lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 1GB, type WB
reg 2, base: 3GB, range: 256MB, type WB
reg 3, base: 3320MB, range: 8MB, type UC
reg 4, base: 4GB, range: 4GB, type WB
reg 5, base: 8GB, range: 8GB, type WB
reg 6, base: 16GB, range: 512MB, type WB
reg 7, base: 16886MB, range: 2MB, type UC
reg 8, base: 16888MB, range: 8MB, type UC
e820: update [mem 0xcf800000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xcf000 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fcc00-0x000fcc0f] mapped at [ffff8800000fcc00]
initial memory mapped: [mem 0x00000000-0x1fffffff]
Base memory trampoline at [ffff880000094000] 94000 size 28672
init_memory_mapping: [mem 0x00000000-0xceffffff]
[mem 0x00000000-0xceffffff] page 2M
kernel direct mapping tables up to 0xceffffff @ [mem 0x1fffb000-0x1fffffff]
init_memory_mapping: [mem 0x100000000-0x41f5fffff]
[mem 0x100000000-0x41f5fffff] page 2M
kernel direct mapping tables up to 0x41f5fffff @ [mem 0xceff2000-0xceffffff]
RAMDISK: [mem 0x1eecf000-0x1ffeffff]
crashkernel: memory value expected
ACPI: RSDP 00000000000f0450 00024 (v02 ALASKA)
ACPI: XSDT 00000000ce07f080 0007C (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 00000000ce088b80 000F4 (v04 ALASKA A M I 01072009 AMI 00010013)
ACPI: DSDT 00000000ce07f190 099EF (v02 ALASKA A M I 00000014 INTL 20051117)
ACPI: FACS 00000000ce096f80 00040
ACPI: APIC 00000000ce088c78 00062 (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: ASF! 00000000ce088ce0 000A5 (v32 INTEL HCG 00000001 TFSM 000F4240)
ACPI: MCFG 00000000ce088d88 0003C (v01 ALASKA A M I 01072009 MSFT 00000097)
ACPI: SSDT 00000000ce088dc8 004A6 (v01 Intel_ AoacTabl 00001000 INTL 20091112)
ACPI: AAFT 00000000ce089270 000C2 (v01 ALASKA OEMAAFT 01072009 MSFT 00000097)
ACPI: HPET 00000000ce089338 00038 (v01 ALASKA A M I 01072009 AMI. 00000005)
ACPI: SSDT 00000000ce089370 0036D (v01 SataRe SataTabl 00001000 INTL 20091112)
ACPI: SSDT 00000000ce0896e0 0079A (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
ACPI: SSDT 00000000ce089e80 00A92 (v01 PmRef CpuPm 00003000 INTL 20051117)
ACPI: BGRT 00000000ce08a918 0003C (v00 ALASKA A M I 01072009 AMI 00010013)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000041f5fffff]
Initmem setup node 0 [mem 0x00000000-0x41f5fffff]
NODE_DATA [mem 0x41f5da000-0x41f5fffff]
[ffffea0000000000-ffffea000e7fffff] PMD -> [ffff88040f000000-ffff88041cdfffff] on node 0
Zone ranges:
DMA [mem 0x00010000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x41f5fffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00010000-0x0009afff]
node 0: [mem 0x00100000-0x1fffffff]
node 0: [mem 0x20200000-0x3fffffff]
node 0: [mem 0x40200000-0xcd89ffff]
node 0: [mem 0xce0e0000-0xceb89fff]
node 0: [mem 0xceff2000-0xceffffff]
node 0: [mem 0x100000000-0x41f5fffff]
On node 0 totalpages: 4117731
DMA zone: 56 pages used for memmap
DMA zone: 7 pages reserved
DMA zone: 3916 pages, LIFO batch:0
DMA32 zone: 14280 pages used for memmap
DMA32 zone: 825232 pages, LIFO batch:31
Normal zone: 44765 pages used for memmap
Normal zone: 3229475 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
smpboot: Allowing 2 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: 000000000009b000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
PM: Registered nosave memory: 0000000020000000 - 0000000020200000
PM: Registered nosave memory: 0000000040000000 - 0000000040200000
PM: Registered nosave memory: 00000000cd8a0000 - 00000000cde18000
PM: Registered nosave memory: 00000000cde18000 - 00000000ce098000
PM: Registered nosave memory: 00000000ce098000 - 00000000ce09d000
PM: Registered nosave memory: 00000000ce09d000 - 00000000ce0e0000
PM: Registered nosave memory: 00000000ceb8a000 - 00000000ceff2000
PM: Registered nosave memory: 00000000cf000000 - 00000000cf800000
PM: Registered nosave memory: 00000000cf800000 - 00000000dfa00000
PM: Registered nosave memory: 00000000dfa00000 - 00000000f8000000
PM: Registered nosave memory: 00000000f8000000 - 00000000fc000000
PM: Registered nosave memory: 00000000fc000000 - 00000000fec00000
PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
PM: Registered nosave memory: 00000000fec01000 - 00000000fed00000
PM: Registered nosave memory: 00000000fed00000 - 00000000fed04000
PM: Registered nosave memory: 00000000fed04000 - 00000000fed1c000
PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000
PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
PM: Registered nosave memory: 00000000fee01000 - 00000000ff000000
PM: Registered nosave memory: 00000000ff000000 - 0000000100000000
e820: [mem 0xdfa00000-0xf7ffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:4096 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1
PERCPU: Embedded 28 pages/cpu @ffff88041f200000 s83520 r8192 d22976 u1048576
pcpu-alloc: s83520 r8192 d22976 u1048576 alloc=1*2097152
pcpu-alloc: [0] 0 1
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 4058623
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
__ex_table already sorted, skipping sort
xsave: enabled xstate_bv 0x3, cntxt size 0x240
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 16144148k/17291264k available (5781k kernel code, 820340k absent, 326776k reserved, 5513k data, 1488k init)
Hierarchical RCU implementation.
RCU restricting CPUs from NR_CPUS=4096 to nr_cpu_ids=2.
NR_IRQS:262400 nr_irqs:512 16
Extended CMOS year: 2000
Console: colour VGA+ 80x25
console [tty0] enabled
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 2300.022 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 4600.04 BogoMIPS (lpj=2300022)
pid_max: default: 32768 minimum: 301
Security Framework initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys cpuacct
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 7 MCE banks
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
tlb_flushall_shift is 0x5
ACPI: Core revision 20120711
ftrace: allocating 23368 entries in 92 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Pentium(R) CPU G630T @ 2.30GHz stepping 07
Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, Intel PMU driver.
perf_event_intel: PEBS disabled due to CPU errata, please upgrade microcode
... version: 3
... bit width: 48
... generic registers: 8
... value mask: 0000ffffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 00000007000000ff
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
smpboot: Booting Node 0, Processors #1 OK
Brought up 2 CPUs
smpboot: Total of 2 processors activated (9200.08 BogoMIPS)
devtmpfs: initialized
PM: Registering ACPI NVS region [mem 0xcde18000-0xce097fff] (2621440 bytes)
PM: Registering ACPI NVS region [mem 0xce09d000-0xce0dffff] (274432 bytes)
dummy:
NET: Registered protocol family 16
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: SSDT 00000000cddc5018 0083B (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 0083B (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
ACPI: SSDT 00000000cddc6a98 00303 (v01 PmRef ApIst 00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20051117)
ACPI: SSDT 00000000cddc7c18 00119 (v01 PmRef ApCst 00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20051117)
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
PCI host bridge to bus 0000:00
pci_bus 0000:00: busn_res: [bus 00-3e] is inserted under domain [bus 00-ff]
pci_bus 0000:00: root bus resource [bus 00-3e]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
pci_bus 0000:00: root bus resource [mem 0xdfa00000-0xfeafffff]
pci 0000:00:00.0: [8086:0100] type 00 class 0x060000
pci 0000:00:02.0: [8086:0102] type 00 class 0x030000
pci 0000:00:02.0: reg 10: [mem 0xf7800000-0xf7bfffff 64bit]
pci 0000:00:02.0: reg 18: [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:00:02.0: reg 20: [io 0xf000-0xf03f]
pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
pci 0000:00:14.0: reg 10: [mem 0xf7e00000-0xf7e0ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
pci 0000:00:16.0: reg 10: [mem 0xf7e1a000-0xf7e1a00f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 10: [mem 0xf7e18000-0xf7e183ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
pci 0000:00:1b.0: reg 10: [mem 0xf7e10000-0xf7e13fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: [8086:1e1a] type 01 class 0x060400
pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.7: [8086:1e1e] type 01 class 0x060400
pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 10: [mem 0xf7e17000-0xf7e173ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1f.0: [8086:1e44] type 00 class 0x060100
pci 0000:00:1f.2: [8086:1e02] type 00 class 0x010601
pci 0000:00:1f.2: reg 10: [io 0xf0b0-0xf0b7]
pci 0000:00:1f.2: reg 14: [io 0xf0a0-0xf0a3]
pci 0000:00:1f.2: reg 18: [io 0xf090-0xf097]
pci 0000:00:1f.2: reg 1c: [io 0xf080-0xf083]
pci 0000:00:1f.2: reg 20: [io 0xf060-0xf07f]
pci 0000:00:1f.2: reg 24: [mem 0xf7e16000-0xf7e167ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 10: [mem 0xf7e15000-0xf7e150ff 64bit]
pci 0000:00:1f.3: reg 20: [io 0xf040-0xf05f]
pci_bus 0000:01: busn_res: [bus 01] is inserted under [bus 00-3e]
pci 0000:01:00.0: [11ab:6485] type 00 class 0x010400
pci 0000:01:00.0: reg 18: [io 0xe000-0xe07f]
pci 0000:01:00.0: reg 20: [mem 0xf7d40000-0xf7d4ffff 64bit]
pci 0000:01:00.0: reg 30: [mem 0xf7d00000-0xf7d3ffff pref]
pci 0000:01:00.0: supports D1
pci 0000:01:00.0: PME# supported from D0 D1 D3hot
pci 0000:00:1c.0: PCI bridge to [bus 01]
pci 0000:00:1c.0: bridge window [io 0xe000-0xefff]
pci 0000:00:1c.0: bridge window [mem 0xf7d00000-0xf7dfffff]
pci_bus 0000:02: busn_res: [bus 02] is inserted under [bus 00-3e]
pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:02:00.0: reg 10: [io 0xd000-0xd0ff]
pci 0000:02:00.0: reg 18: [mem 0xf0004000-0xf0004fff 64bit pref]
pci 0000:02:00.0: reg 20: [mem 0xf0000000-0xf0003fff 64bit pref]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.5: PCI bridge to [bus 02]
pci 0000:00:1c.5: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.5: bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
pci_bus 0000:03: busn_res: [bus 03] is inserted under [bus 00-3e]
pci 0000:03:00.0: [1b21:0612] type 00 class 0x010601
pci 0000:03:00.0: reg 10: [io 0xc050-0xc057]
pci 0000:03:00.0: reg 14: [io 0xc040-0xc043]
pci 0000:03:00.0: reg 18: [io 0xc030-0xc037]
pci 0000:03:00.0: reg 1c: [io 0xc020-0xc023]
pci 0000:03:00.0: reg 20: [io 0xc000-0xc01f]
pci 0000:03:00.0: reg 24: [mem 0xf7c00000-0xf7c001ff]
pci 0000:00:1c.7: PCI bridge to [bus 03]
pci 0000:00:1c.7: bridge window [io 0xc000-0xcfff]
pci 0000:00:1c.7: bridge window [mem 0xf7c00000-0xf7cfffff]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP08._PRT]
pci0000:00: Requesting ACPI _OSC control (0x1d)
pci0000:00: ACPI _OSC control (0x1c) granted
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 *4 5 6 10 11 12 14 15)
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:02.0
SCSI subsystem initialized
ACPI: bus type scsi registered
libata version 3.00 loaded.
ACPI: bus type usb registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009b000-0x0009ffff]
e820: reserve RAM buffer [mem 0xcd8a0000-0xcfffffff]
e820: reserve RAM buffer [mem 0xceb8a000-0xcfffffff]
e820: reserve RAM buffer [mem 0xcf000000-0xcfffffff]
e820: reserve RAM buffer [mem 0x41f600000-0x41fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
nfc: nfc_init: NFC Core ver 0.1
NET: Registered protocol family 39
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource hpet
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [bus 00-3e]
pnp 00:00: [io 0x0000-0x0cf7 window]
pnp 00:00: [io 0x0cf8-0x0cff]
pnp 00:00: [io 0x0d00-0xffff window]
pnp 00:00: [mem 0x000a0000-0x000bffff window]
pnp 00:00: [mem 0x000c0000-0x000c3fff window]
pnp 00:00: [mem 0x000c4000-0x000c7fff window]
pnp 00:00: [mem 0x000c8000-0x000cbfff window]
pnp 00:00: [mem 0x000cc000-0x000cffff window]
pnp 00:00: [mem 0x000d0000-0x000d3fff window]
pnp 00:00: [mem 0x000d4000-0x000d7fff window]
pnp 00:00: [mem 0x000d8000-0x000dbfff window]
pnp 00:00: [mem 0x000dc000-0x000dffff window]
pnp 00:00: [mem 0x000e0000-0x000e3fff window]
pnp 00:00: [mem 0x000e4000-0x000e7fff window]
pnp 00:00: [mem 0x000e8000-0x000ebfff window]
pnp 00:00: [mem 0x000ec000-0x000effff window]
pnp 00:00: [mem 0x000f0000-0x000fffff window]
pnp 00:00: [mem 0xdfa00000-0xfeafffff window]
pnp 00:00: [mem 0x00010000-0x0001ffff window]
pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
pnp 00:01: [mem 0xfed40000-0xfed44fff]
system 00:01: [mem 0xfed40000-0xfed44fff] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:02: [io 0x0000-0x001f]
pnp 00:02: [io 0x0081-0x0091]
pnp 00:02: [io 0x0093-0x009f]
pnp 00:02: [io 0x00c0-0x00df]
pnp 00:02: [dma 4]
pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:03: [mem 0xff000000-0xffffffff]
pnp 00:03: Plug and Play ACPI device, IDs INT0800 (active)
pnp 00:04: [mem 0xfed00000-0xfed003ff]
pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:05: [io 0x002e-0x002f]
pnp 00:05: [io 0x004e-0x004f]
pnp 00:05: [io 0x0061]
pnp 00:05: [io 0x0063]
pnp 00:05: [io 0x0065]
pnp 00:05: [io 0x0067]
pnp 00:05: [io 0x0070]
pnp 00:05: [io 0x0080]
pnp 00:05: [io 0x0092]
pnp 00:05: [io 0x00b2-0x00b3]
pnp 00:05: [io 0x0680-0x069f]
pnp 00:05: [io 0x0200-0x020f]
pnp 00:05: [io 0xffff]
pnp 00:05: [io 0xffff]
pnp 00:05: [io 0x0400-0x0453]
pnp 00:05: [io 0x0458-0x047f]
pnp 00:05: [io 0x0500-0x057f]
pnp 00:05: [io 0x164e-0x164f]
system 00:05: [io 0x0680-0x069f] has been reserved
system 00:05: [io 0x0200-0x020f] has been reserved
system 00:05: [io 0xffff] has been reserved
system 00:05: [io 0xffff] has been reserved
system 00:05: [io 0x0400-0x0453] has been reserved
system 00:05: [io 0x0458-0x047f] has been reserved
system 00:05: [io 0x0500-0x057f] has been reserved
system 00:05: [io 0x164e-0x164f] has been reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:06: [io 0x0070-0x0077]
pnp 00:06: [irq 8]
pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:07: [io 0x0454-0x0457]
system 00:07: [io 0x0454-0x0457] has been reserved
system 00:07: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
pnp 00:08: [io 0x0000-0xffffffffffffffff disabled]
pnp 00:08: [io 0x0290-0x029f]
pnp 00:08: [io 0x0000-0xffffffffffffffff disabled]
system 00:08: [io 0x0290-0x029f] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:09: [io 0x0010-0x001f]
pnp 00:09: [io 0x0022-0x003f]
pnp 00:09: [io 0x0044-0x005f]
pnp 00:09: [io 0x0062-0x0063]
pnp 00:09: [io 0x0065-0x006f]
pnp 00:09: [io 0x0072-0x007f]
pnp 00:09: [io 0x0080]
pnp 00:09: [io 0x0084-0x0086]
pnp 00:09: [io 0x0088]
pnp 00:09: [io 0x008c-0x008e]
pnp 00:09: [io 0x0090-0x009f]
pnp 00:09: [io 0x00a2-0x00bf]
pnp 00:09: [io 0x00e0-0x00ef]
pnp 00:09: [io 0x04d0-0x04d1]
system 00:09: [io 0x04d0-0x04d1] has been reserved
system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0a: [io 0x00f0-0x00ff]
pnp 00:0a: [irq 13]
pnp 00:0a: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:0b: [io 0x0060]
pnp 00:0b: [io 0x0064]
pnp 00:0b: [irq 1]
pnp 00:0b: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
pnp 00:0c: [mem 0xfed1c000-0xfed1ffff]
pnp 00:0c: [mem 0xfed10000-0xfed17fff]
pnp 00:0c: [mem 0xfed18000-0xfed18fff]
pnp 00:0c: [mem 0xfed19000-0xfed19fff]
pnp 00:0c: [mem 0xf8000000-0xfbffffff]
pnp 00:0c: [mem 0xfed20000-0xfed3ffff]
pnp 00:0c: [mem 0xfed90000-0xfed93fff]
pnp 00:0c: [mem 0xfed45000-0xfed8ffff]
pnp 00:0c: [mem 0xff000000-0xffffffff]
pnp 00:0c: [mem 0xfee00000-0xfeefffff]
pnp 00:0c: [mem 0xdfa00000-0xdfa00fff]
system 00:0c: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:0c: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:0c: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:0c: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:0c: [mem 0xf8000000-0xfbffffff] has been reserved
system 00:0c: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:0c: [mem 0xfed90000-0xfed93fff] has been reserved
system 00:0c: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:0c: [mem 0xff000000-0xffffffff] has been reserved
system 00:0c: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:0c: [mem 0xdfa00000-0xdfa00fff] has been reserved
system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0d: [mem 0x20000000-0x201fffff]
pnp 00:0d: [mem 0x40000000-0x401fffff]
system 00:0d: [mem 0x20000000-0x201fffff] has been reserved
system 00:0d: [mem 0x40000000-0x401fffff] has been reserved
system 00:0d: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 14 devices
ACPI: ACPI bus type pnp unregistered
pci 0000:00:1c.0: PCI bridge to [bus 01]
pci 0000:00:1c.0: bridge window [io 0xe000-0xefff]
pci 0000:00:1c.0: bridge window [mem 0xf7d00000-0xf7dfffff]
pci 0000:00:1c.5: PCI bridge to [bus 02]
pci 0000:00:1c.5: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.5: bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
pci 0000:00:1c.7: PCI bridge to [bus 03]
pci 0000:00:1c.7: bridge window [io 0xc000-0xcfff]
pci 0000:00:1c.7: bridge window [mem 0xf7c00000-0xf7cfffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000d7fff]
pci_bus 0000:00: resource 8 [mem 0x000d8000-0x000dbfff]
pci_bus 0000:00: resource 9 [mem 0x000dc000-0x000dffff]
pci_bus 0000:00: resource 10 [mem 0x000e0000-0x000e3fff]
pci_bus 0000:00: resource 11 [mem 0x000e4000-0x000e7fff]
pci_bus 0000:00: resource 12 [mem 0xdfa00000-0xfeafffff]
pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xf7d00000-0xf7dfffff]
pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:02: resource 2 [mem 0xf0000000-0xf00fffff 64bit pref]
pci_bus 0000:03: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:03: resource 1 [mem 0xf7c00000-0xf7cfffff]
NET: Registered protocol family 2
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP: reno registered
UDP hash table entries: 8192 (order: 6, 262144 bytes)
UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: Boot video device
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 17540k freed
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xc98a0000-0xcd89ffff] (64MB) mapped at [ffff8800c98a0000-ffff8800cd89ffff]
audit: initializing netlink socket (disabled)
type=2000 audit(1361350835.473:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 31565
SELinux: Registering netfilter hooks
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
pcieport 0000:00:1c.5: irq 41 for MSI/MSI-X
pcieport 0000:00:1c.7: irq 42 for MSI/MSI-X
pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.5: Signaling PME through PCIe PME interrupt
pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.5:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.7: Signaling PME through PCIe PME interrupt
pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.7:pcie01: service driver pcie_pme loaded
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
intel_idle: MWAIT substates: 0x1120
intel_idle: v0.4 model 0x2A
intel_idle: lapic_timer_reliable_states 0xffffffff
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ACPI: Requesting acpi_cpufreq
GHES: HEST is not enabled!
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
[drm] Initialized drm 1.1.0 20060810
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1a.0: setting latency timer to 64
ehci_hcd 0000:00:1a.0: EHCI Host Controller
ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.0: debug port 2
ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
ehci_hcd 0000:00:1a.0: irq 16, io mem 0xf7e18000
ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.6.6-1.el6.elrepo.x86_64 ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci_hcd 0000:00:1d.0: setting latency timer to 64
ehci_hcd 0000:00:1d.0: EHCI Host Controller
ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.0: debug port 2
ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
ehci_hcd 0000:00:1d.0: irq 23, io mem 0xf7e17000
ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.6.6-1.el6.elrepo.x86_64 ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
usbcore: registered new interface driver libusual
i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
serio: i8042 KBD port at 0x60,0x64 irq 1
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:06: RTC can wake from S4
rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
cpuidle: using governor ladder
cpuidle: using governor menu
EFI Variables Facility v0.08 2004-May-17
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
zram: num_devices not specified. Using default: 1
zram: Creating 1 devices ...
TCP: cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
registered taskstats version 1
IMA: No TPM chip found, activating TPM-bypass!
rtc_cmos 00:06: setting system clock to 2013-02-20 09:00:35 UTC (1361350835)
Freeing unused kernel memory: 1488k freed
Write protecting the kernel read-only data: 10240k
Freeing unused kernel memory: 352k freed
Freeing unused kernel memory: 1376k freed
dracut: dracut-004-284.el6_3.1
dracut: rd_NO_LUKS: removing cryptoluks activation
dracut: rd_NO_LVM: removing LVM activation
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.23.0-ioctl (2012-07-25) initialised: dm-devel@redhat.com
udev: starting version 147
udevd (81): /proc/81/oom_adj is deprecated, please use /proc/81/oom_score_adj instead.
pci 0000:00:00.0: Intel Sandybridge Chipset
pci 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
pci 0000:00:00.0: detected 262144K stolen memory
i915 0000:00:02.0: setting latency timer to 64
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
i915 0000:00:02.0: irq 43 for MSI/MSI-X
[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[drm] Driver supports precise vblank timestamp query.
vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
usb 1-1: new high-speed USB device number 2 using ehci_hcd
[drm] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4
fbcon: inteldrmfb (fb0) is primary device
usb 1-1: New USB device found, idVendor=8087, idProduct=0024
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
Console: switching to colour frame buffer device 200x75
fb0: inteldrmfb frame buffer device
drm: registered panic notifier
usb 2-1: new high-speed USB device number 2 using ehci_hcd
acpi device:42: registered as cooling_device2
ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input3
[drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
dracut: Starting plymouth daemon
usb 2-1: New USB device found, idVendor=8087, idProduct=0024
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
usb 1-1.3: new low-speed USB device number 3 using ehci_hcd
dracut: rd_NO_DM: removing DM RAID activation
dracut: rd_NO_MD: removing MD RAID activation
usb 1-1.3: New USB device found, idVendor=046d, idProduct=c062
usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1.3: Product: USB Laser Mouse
usb 1-1.3: Manufacturer: Logitech
input: Logitech USB Laser Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input4
hid-generic 0003:046D:C062.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB Laser Mouse] on usb-0000:00:1a.0-1.3/input0
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: irq 44 for MSI/MSI-X
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst
ahci 0000:00:1f.2: setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m2048@0xf7e16000 port 0xf7e16100 irq 44
ata2: SATA max UDMA/133 abar m2048@0xf7e16000 port 0xf7e16180 irq 44
ata3: SATA max UDMA/133 abar m2048@0xf7e16000 port 0xf7e16200 irq 44
ata4: SATA max UDMA/133 abar m2048@0xf7e16000 port 0xf7e16280 irq 44
ata5: SATA max UDMA/133 abar m2048@0xf7e16000 port 0xf7e16300 irq 44
ata6: SATA max UDMA/133 abar m2048@0xf7e16000 port 0xf7e16380 irq 44
ahci 0000:03:00.0: irq 45 for MSI/MSI-X
ahci: SSS flag set, parallel bus scan disabled
ahci 0000:03:00.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
ahci 0000:03:00.0: flags: 64bit ncq sntf stag led clo pmp pio slum part ccc sxs
scsi6 : ahci
scsi7 : ahci
ata7: SATA max UDMA/133 abar m512@0xf7c00000 port 0xf7c00100 irq 45
ata8: SATA max UDMA/133 abar m512@0xf7c00000 port 0xf7c00180 irq 45
tsc: Refined TSC clocksource calibration: 2300.016 MHz
Switching to clocksource tsc
ata3: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
ata7: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
ata2: SATA link down (SStatus 0 SControl 300)
ata1: SATA link down (SStatus 0 SControl 300)
ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata5.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
ata5.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata5.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
ata5.00: ATA-9: SAMSUNG SSD 830 Series, CXM03B1Q, max UDMA/133
ata5.00: 125045424 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata5.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
ata5.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata5.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
ata5.00: configured for UDMA/133
scsi 4:0:0:0: Direct-Access ATA SAMSUNG SSD 830 CXM0 PQ: 0 ANSI: 5
ata8: SATA link down (SStatus 0 SControl 300)
mvsas 0000:01:00.0: mvsas: driver version 0.8.16
mvsas 0000:01:00.0: mvsas: PCI-E x4, Bandwidth Usage: 2.5 Gbps
scsi8 : mvsas
sas: phy-8:0 added to port-8:0, phy_mask:0x1 ( 0)
sas: phy-8:1 added to port-8:1, phy_mask:0x2 ( 100000000000000)
sas: phy-8:2 added to port-8:2, phy_mask:0x4 ( 200000000000000)
sas: phy-8:3 added to port-8:3, phy_mask:0x8 ( 300000000000000)
sas: phy-8:4 added to port-8:4, phy_mask:0x10 ( 400000000000000)
sas: phy-8:5 added to port-8:5, phy_mask:0x20 ( 500000000000000)
sas: phy-8:6 added to port-8:6, phy_mask:0x40 ( 600000000000000)
sas: phy-8:7 added to port-8:7, phy_mask:0x80 ( 700000000000000)
sas: DOING DISCOVERY on port 0, pid:294
sas: DONE DISCOVERY on port 0, pid:294, result:0
sas: DOING DISCOVERY on port 1, pid:294
sas: DONE DISCOVERY on port 1, pid:294, result:0
sas: DOING DISCOVERY on port 2, pid:294
sas: DONE DISCOVERY on port 2, pid:294, result:0
sas: DOING DISCOVERY on port 3, pid:294
sas: DONE DISCOVERY on port 3, pid:294, result:0
sas: DOING DISCOVERY on port 4, pid:294
sas: DONE DISCOVERY on port 4, pid:294, result:0
sas: DOING DISCOVERY on port 5, pid:294
sas: DONE DISCOVERY on port 5, pid:294, result:0
sas: DOING DISCOVERY on port 6, pid:294
sas: DONE DISCOVERY on port 6, pid:294, result:0
sas: DOING DISCOVERY on port 7, pid:294
sas: DONE DISCOVERY on port 7, pid:294, result:0
sas: Enter sas_scsi_recover_host busy: 0 failed: 0
sas: ata9: end_device-8:0: dev error handler
ata9.00: ATA-8: ST1000NM0011, SN02, max UDMA/133
ata9.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
ata9.00: configured for UDMA/133
sas: --- Exit sas_scsi_recover_host: busy: 0 failed: 0 tries: 1
scsi 8:0:0:0: Direct-Access ATA ST1000NM0011 SN02 PQ: 0 ANSI: 5
sas: Enter sas_scsi_recover_host busy: 0 failed: 0
sas: ata9: end_device-8:0: dev error handler
sas: ata10: end_device-8:1: dev error handler
ata10.00: ATA-8: ST1000NM0011, SN02, max UDMA/133
ata10.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
ata10.00: configured for UDMA/133
sas: --- Exit sas_scsi_recover_host: busy: 0 failed: 0 tries: 1
scsi 8:0:1:0: Direct-Access ATA ST1000NM0011 SN02 PQ: 0 ANSI: 5
sas: Enter sas_scsi_recover_host busy: 0 failed: 0
sas: ata9: end_device-8:0: dev error handler
sas: ata10: end_device-8:1: dev error handler
sas: ata11: end_device-8:2: dev error handler
ata11.00: ATA-8: ST1000NM0011, SN02, max UDMA/133
ata11.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
ata11.00: configured for UDMA/133
sas: --- Exit sas_scsi_recover_host: busy: 0 failed: 0 tries: 1
scsi 8:0:2:0: Direct-Access ATA ST1000NM0011 SN02 PQ: 0 ANSI: 5
sas: Enter sas_scsi_recover_host busy: 0 failed: 0
sas: ata9: end_device-8:0: dev error handler
sas: ata10: end_device-8:1: dev error handler
sas: ata11: end_device-8:2: dev error handler
sas: ata12: end_device-8:3: dev error handler
ata12.00: ATA-8: ST1000NM0011, SN02, max UDMA/133
ata12.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
ata12.00: configured for UDMA/133
sas: --- Exit sas_scsi_recover_host: busy: 0 failed: 0 tries: 1
scsi 8:0:3:0: Direct-Access ATA ST1000NM0011 SN02 PQ: 0 ANSI: 5
sas: Enter sas_scsi_recover_host busy: 0 failed: 0
sas: ata9: end_device-8:0: dev error handler
sas: ata10: end_device-8:1: dev error handler
sas: ata11: end_device-8:2: dev error handler
sas: ata12: end_device-8:3: dev error handler
sas: ata13: end_device-8:4: dev error handler
ata13.00: ATA-8: ST1000NM0011, SN03, max UDMA/133
ata13.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
ata13.00: configured for UDMA/133
sas: --- Exit sas_scsi_recover_host: busy: 0 failed: 0 tries: 1
scsi 8:0:4:0: Direct-Access ATA ST1000NM0011 SN03 PQ: 0 ANSI: 5
sas: Enter sas_scsi_recover_host busy: 0 failed: 0
sas: ata9: end_device-8:0: dev error handler
sas: ata10: end_device-8:1: dev error handler
sas: ata11: end_device-8:2: dev error handler
sas: ata12: end_device-8:3: dev error handler
sas: ata13: end_device-8:4: dev error handler
sas: ata14: end_device-8:5: dev error handler
ata14.00: ATA-8: ST1000NM0011, SN02, max UDMA/133
ata14.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
ata14.00: configured for UDMA/133
sas: --- Exit sas_scsi_recover_host: busy: 0 failed: 0 tries: 1
scsi 8:0:5:0: Direct-Access ATA ST1000NM0011 SN02 PQ: 0 ANSI: 5
sas: Enter sas_scsi_recover_host busy: 0 failed: 0
sas: ata9: end_device-8:0: dev error handler
sas: ata10: end_device-8:1: dev error handler
sas: ata11: end_device-8:2: dev error handler
sas: ata12: end_device-8:3: dev error handler
sas: ata13: end_device-8:4: dev error handler
sas: ata14: end_device-8:5: dev error handler
sas: ata15: end_device-8:6: dev error handler
ata15.00: ATA-8: ST1000NM0011, SN03, max UDMA/133
ata15.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
ata15.00: configured for UDMA/133
sas: --- Exit sas_scsi_recover_host: busy: 0 failed: 0 tries: 1
scsi 8:0:6:0: Direct-Access ATA ST1000NM0011 SN03 PQ: 0 ANSI: 5
sas: Enter sas_scsi_recover_host busy: 0 failed: 0
sas: ata9: end_device-8:0: dev error handler
sas: ata10: end_device-8:1: dev error handler
sas: ata11: end_device-8:2: dev error handler
sas: ata12: end_device-8:3: dev error handler
sas: ata13: end_device-8:4: dev error handler
sas: ata14: end_device-8:5: dev error handler
sas: ata15: end_device-8:6: dev error handler
sas: ata16: end_device-8:7: dev error handler
ata16.00: ATA-8: ST1000NM0011, SN02, max UDMA/133
ata16.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
ata16.00: configured for UDMA/133
sas: --- Exit sas_scsi_recover_host: busy: 0 failed: 0 tries: 1
scsi 8:0:7:0: Direct-Access ATA ST1000NM0011 SN02 PQ: 0 ANSI: 5
sd 4:0:0:0: [sda] 125045424 512-byte logical blocks: (64.0 GB/59.6 GiB)
sd 4:0:0:0: [sda] Write Protect is off
sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 8:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
sd 8:0:1:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
sd 8:0:0:0: [sdb] Write Protect is off
sd 8:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 8:0:1:0: [sdc] Write Protect is off
sd 8:0:1:0: [sdc] Mode Sense: 00 3a 00 00
sd 8:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 8:0:1:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ACPI: Invalid Power Resource to register!
sd 8:0:2:0: [sdd] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
sd 8:0:2:0: [sdd] Write Protect is off
sd 8:0:2:0: [sdd] Mode Sense: 00 3a 00 00
sd 8:0:2:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 8:0:3:0: [sde] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
sd 8:0:3:0: [sde] Write Protect is off
sd 8:0:3:0: [sde] Mode Sense: 00 3a 00 00
sd 8:0:3:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 8:0:4:0: [sdf] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
sd 8:0:4:0: [sdf] Write Protect is off
sd 8:0:4:0: [sdf] Mode Sense: 00 3a 00 00
sd 8:0:4:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 8:0:5:0: [sdg] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
sd 8:0:5:0: [sdg] Write Protect is off
sd 8:0:5:0: [sdg] Mode Sense: 00 3a 00 00
sd 8:0:5:0: [sdg] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 8:0:6:0: [sdh] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
sda: sda1 sda2 < sda5 >
sd 8:0:6:0: [sdh] Write Protect is off
sd 8:0:6:0: [sdh] Mode Sense: 00 3a 00 00
sd 8:0:6:0: [sdh] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 8:0:7:0: [sdi] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
sd 8:0:7:0: [sdi] Write Protect is off
sd 8:0:7:0: [sdi] Mode Sense: 00 3a 00 00
sd 4:0:0:0: [sda] Attached SCSI disk
sd 8:0:7:0: [sdi] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdb: sdb1
sd 8:0:0:0: [sdb] Attached SCSI disk
sdh: sdh1
sd 8:0:6:0: [sdh] Attached SCSI disk
sdi: sdi1
sd 8:0:7:0: [sdi] Attached SCSI disk
sdf: sdf1
sd 8:0:4:0: [sdf] Attached SCSI disk
sdd: sdd1
sd 8:0:2:0: [sdd] Attached SCSI disk
sde: sde1
sdc: sdc1
sd 8:0:3:0: [sde] Attached SCSI disk
sd 8:0:1:0: [sdc] Attached SCSI disk
sdg: sdg1
sd 8:0:5:0: [sdg] Attached SCSI disk
wmi: Mapper loaded
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: discard
dracut: Mounted root filesystem /dev/sda1
dracut: Loading SELinux policy
type=1404 audit(1361350844.254:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
SELinux: 2048 avtab hash slots, 253088 rules.
SELinux: 2048 avtab hash slots, 253088 rules.
SELinux: 9 users, 12 roles, 3785 types, 190 bools, 1 sens, 1024 cats
SELinux: 81 classes, 253088 rules
SELinux: Permission audit_access in class file not defined in policy.
SELinux: Permission audit_access in class dir not defined in policy.
SELinux: Permission execmod in class dir not defined in policy.
SELinux: Permission audit_access in class lnk_file not defined in policy.
SELinux: Permission open in class lnk_file not defined in policy.
SELinux: Permission execmod in class lnk_file not defined in policy.
SELinux: Permission audit_access in class chr_file not defined in policy.
SELinux: Permission audit_access in class blk_file not defined in policy.
SELinux: Permission execmod in class blk_file not defined in policy.
SELinux: Permission audit_access in class sock_file not defined in policy.
SELinux: Permission execmod in class sock_file not defined in policy.
SELinux: Permission audit_access in class fifo_file not defined in policy.
SELinux: Permission execmod in class fifo_file not defined in policy.
SELinux: Permission syslog in class capability2 not defined in policy.
SELinux: Permission wake_alarm in class capability2 not defined in policy.
SELinux: Permission block_suspend in class capability2 not defined in policy.
SELinux: the above unknown classes and permissions will be allowed
SELinux: Completing initialization.
SELinux: Setting up existing superblocks.
SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
SELinux: initialized (dev proc, type proc), uses genfs_contexts
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev devtmpfs, type devtmpfs), uses transition SIDs
SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
SELinux: initialized (dev devpts, type devpts), uses transition SIDs
SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs
SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
SELinux: initialized (dev securityfs, type securityfs), uses genfs_contexts
SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev sda1, type ext4), uses xattr
type=1403 audit(1361350844.736:3): policy loaded auid=4294967295 ses=4294967295
dracut:
dracut: Switching root
readahead: starting
udev: starting version 147
WARNING! power/level is deprecated; use power/control instead
mei 0000:00:16.0: setting latency timer to 64
mei 0000:00:16.0: irq 46 for MSI/MSI-X
mei 0000:00:16.0: wd: failed to find the client
xhci_hcd 0000:00:14.0: setting latency timer to 64
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
xhci_hcd 0000:00:14.0: irq 16, io mem 0xf7e00000
xhci_hcd 0000:00:14.0: irq 47 for MSI/MSI-X
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 3.6.6-1.el6.elrepo.x86_64 xhci_hcd
usb usb3: SerialNumber: 0000:00:14.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 3.6.6-1.el6.elrepo.x86_64 xhci_hcd
usb usb4: SerialNumber: 0000:00:14.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 4 ports detected
snd_hda_intel 0000:00:1b.0: irq 48 for MSI/MSI-X
input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input5
input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
sd 4:0:0:0: Attached scsi generic sg0 type 0
sd 8:0:0:0: Attached scsi generic sg1 type 0
sd 8:0:1:0: Attached scsi generic sg2 type 0
sd 8:0:2:0: Attached scsi generic sg3 type 0
sd 8:0:3:0: Attached scsi generic sg4 type 0
sd 8:0:4:0: Attached scsi generic sg5 type 0
sd 8:0:5:0: Attached scsi generic sg6 type 0
sd 8:0:6:0: Attached scsi generic sg7 type 0
sd 8:0:7:0: Attached scsi generic sg8 type 0
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:02:00.0: irq 49 for MSI/MSI-X
r8169 0000:02:00.0: eth0: RTL8168evl/8111evl at 0xffffc900061f4000, bc:5f:f4:44:ab:91, XID 0c900800 IRQ 49
r8169 0000:02:00.0: eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20120711/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: 0x0000000000000500-0x000000000000053f SystemIO conflicts with Region \GPR2 1 (20120711/utaddress-251)
ACPI Warning: 0x0000000000000500-0x000000000000053f SystemIO conflicts with Region \GPIO 2 (20120711/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
ACPI Warning: 0x000000000000f040-0x000000000000f05f SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20120711/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
input: PC Speaker as /devices/platform/pcspkr/input/input14
microcode: CPU0 sig=0x206a7, pf=0x2, revision=0x25
microcode: CPU1 sig=0x206a7, pf=0x2, revision=0x25
microcode: Microcode Update Driver: v2.00 , Peter Oruba
md: bind
md: bind
md: bind
md: bind
md: bind
md: bind
md: bind
md: bind
md: raid10 personality registered for level 10
bio: create slab at 1
md/raid10:md127: active with 8 out of 8 devices
md127: detected capacity change from 0 to 4000808173568
md127: unknown partition table
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0460)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
device-mapper: multipath: version 1.5.0 loaded
EXT4-fs (sda1): re-mounted. Opts: discard
EXT4-fs (md127): mounted filesystem with ordered data mode. Opts: (null)
SELinux: initialized (dev md127, type ext4), uses xattr
Adding 4100092k swap on /dev/sda5. Priority:-1 extents:1 across:4100092k SS
SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
NET: Registered protocol family 10
8021q: 802.1Q VLAN Support v1.8
cnic: Broadcom NetXtreme II CNIC Driver cnic v2.5.12 (June 29, 2012)
bnx2fc: Broadcom NetXtreme II FCoE Driver bnx2fc v1.0.12 (Jun 04, 2012)
netlink: 12 bytes leftover after parsing attributes.
netlink: 12 bytes leftover after parsing attributes.
netlink: 12 bytes leftover after parsing attributes.
r8169 0000:02:00.0: eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
SELinux: initialized (dev nfsd, type nfsd), uses genfs_contexts
r8169 0000:02:00.0: eth0: link up
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
NFSD: starting 90-second grace period
fuse init (API version 7.20)
EXT4-fs (sda1): Unaligned AIO/DIO on inode 660018 by fio; performance will be poor.
INFO: task sync:19065 blocked for more than 120 seconds.
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
sync D ffffffff816104a0 0 19065 19020 0x00000080
ffff880385695d28 0000000000000082 ffff880385695fd8 00000000000139c0
ffff880385694010 00000000000139c0 00000000000139c0 00000000000139c0
ffff880385695fd8 00000000000139c0 ffff88040ed7d540 ffff88040d411540
Call Trace:
[] schedule+0x29/0x70
[] schedule_timeout+0x19d/0x220
[] ? __schedule+0x3ed/0x710
[] wait_for_common+0xd4/0x180
[] ? try_to_wake_up+0x2b0/0x2b0
[] ? fdatawrite_one_bdev+0x20/0x20
[] wait_for_completion+0x1d/0x20
[] sync_inodes_sb+0x99/0xd0
[] sync_inodes_one_sb+0x1d/0x30
[] iterate_supers+0xb3/0xe0
[] sys_sync+0x35/0x90
[] system_call_fastpath+0x16/0x1b
INFO: task sync:19065 blocked for more than 120 seconds.
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
sync D ffffffff816104a0 0 19065 19020 0x00000080
ffff880385695d28 0000000000000082 ffff880385695fd8 00000000000139c0
ffff880385694010 00000000000139c0 00000000000139c0 00000000000139c0
ffff880385695fd8 00000000000139c0 ffff88040ed7d540 ffff88040d411540
Call Trace:
[] schedule+0x29/0x70
[] schedule_timeout+0x19d/0x220
[] ? __schedule+0x3ed/0x710
[] wait_for_common+0xd4/0x180
[] ? try_to_wake_up+0x2b0/0x2b0
[] ? fdatawrite_one_bdev+0x20/0x20
[] wait_for_completion+0x1d/0x20
[] sync_inodes_sb+0x99/0xd0
[] sync_inodes_one_sb+0x1d/0x30
[] iterate_supers+0xb3/0xe0
[] sys_sync+0x35/0x90
[] system_call_fastpath+0x16/0x1b
INFO: task sync:19395 blocked for more than 120 seconds.
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
sync D ffffffff816104a0 0 19395 19351 0x00000080
ffff88034f5a3d28 0000000000000082 ffff88034f5a3fd8 00000000000139c0
ffff88034f5a2010 00000000000139c0 00000000000139c0 00000000000139c0
ffff88034f5a3fd8 00000000000139c0 ffff88040ed7d540 ffff88040a186b20
Call Trace:
[] schedule+0x29/0x70
[] schedule_timeout+0x19d/0x220
[] ? __schedule+0x3ed/0x710
[] wait_for_common+0xd4/0x180
[] ? try_to_wake_up+0x2b0/0x2b0
[] ? fdatawrite_one_bdev+0x20/0x20
[] wait_for_completion+0x1d/0x20
[] sync_inodes_sb+0x99/0xd0
[] sync_inodes_one_sb+0x1d/0x30
[] iterate_supers+0xb3/0xe0
[] sys_sync+0x35/0x90
[] system_call_fastpath+0x16/0x1b
INFO: task sync:19395 blocked for more than 120 seconds.
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
sync D ffffffff816104a0 0 19395 19351 0x00000080
ffff88034f5a3d28 0000000000000082 ffff88034f5a3fd8 00000000000139c0
ffff88034f5a2010 00000000000139c0 00000000000139c0 00000000000139c0
ffff88034f5a3fd8 00000000000139c0 ffff88040ed7d540 ffff88040a186b20
Call Trace:
[] schedule+0x29/0x70
[] schedule_timeout+0x19d/0x220
[] ? __schedule+0x3ed/0x710
[] wait_for_common+0xd4/0x180
[] ? try_to_wake_up+0x2b0/0x2b0
[] ? fdatawrite_one_bdev+0x20/0x20
[] wait_for_completion+0x1d/0x20
[] sync_inodes_sb+0x99/0xd0
[] sync_inodes_one_sb+0x1d/0x30
[] iterate_supers+0xb3/0xe0
[] sys_sync+0x35/0x90
[] system_call_fastpath+0x16/0x1b
INFO: task sync:19395 blocked for more than 120 seconds.
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
sync D ffffffff816104a0 0 19395 19351 0x00000080
ffff88034f5a3d28 0000000000000082 ffff88034f5a3fd8 00000000000139c0
ffff88034f5a2010 00000000000139c0 00000000000139c0 00000000000139c0
ffff88034f5a3fd8 00000000000139c0 ffff88040ed7d540 ffff88040a186b20
Call Trace:
[] schedule+0x29/0x70
[] schedule_timeout+0x19d/0x220
[] ? __schedule+0x3ed/0x710
[] wait_for_common+0xd4/0x180
[] ? try_to_wake_up+0x2b0/0x2b0
[] ? fdatawrite_one_bdev+0x20/0x20
[] wait_for_completion+0x1d/0x20
[] sync_inodes_sb+0x99/0xd0
[] sync_inodes_one_sb+0x1d/0x30
[] iterate_supers+0xb3/0xe0
[] sys_sync+0x35/0x90
[] system_call_fastpath+0x16/0x1b
INFO: task sync:19734 blocked for more than 120 seconds.
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
sync D ffffffff816104a0 0 19734 19690 0x00000080
ffff880356ec9d28 0000000000000082 ffff880356ec9fd8 00000000000139c0
ffff880356ec8010 00000000000139c0 00000000000139c0 00000000000139c0
ffff880356ec9fd8 00000000000139c0 ffffffff81a13420 ffff88040d346a60
Call Trace:
[] schedule+0x29/0x70
[] schedule_timeout+0x19d/0x220
[] ? enqueue_task_fair+0x64/0x130
[] wait_for_common+0xd4/0x180
[] ? try_to_wake_up+0x2b0/0x2b0
[] ? fdatawrite_one_bdev+0x20/0x20
[] wait_for_completion+0x1d/0x20
[] sync_inodes_sb+0x99/0xd0
[] sync_inodes_one_sb+0x1d/0x30
[] iterate_supers+0xb3/0xe0
[] sys_sync+0x35/0x90
[] system_call_fastpath+0x16/0x1b
INFO: task sync:19734 blocked for more than 120 seconds.
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
sync D ffffffff816104a0 0 19734 19690 0x00000080
ffff880356ec9d28 0000000000000082 ffff880356ec9fd8 00000000000139c0
ffff880356ec8010 00000000000139c0 00000000000139c0 00000000000139c0
ffff880356ec9fd8 00000000000139c0 ffffffff81a13420 ffff88040d346a60
Call Trace:
[] schedule+0x29/0x70
[] schedule_timeout+0x19d/0x220
[] ? enqueue_task_fair+0x64/0x130
[] wait_for_common+0xd4/0x180
[] ? try_to_wake_up+0x2b0/0x2b0
[] ? fdatawrite_one_bdev+0x20/0x20
[] wait_for_completion+0x1d/0x20
[] sync_inodes_sb+0x99/0xd0
[] sync_inodes_one_sb+0x1d/0x30
[] iterate_supers+0xb3/0xe0
[] sys_sync+0x35/0x90
[] system_call_fastpath+0x16/0x1b
INFO: task sync:19734 blocked for more than 120 seconds.
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
sync D ffffffff816104a0 0 19734 19690 0x00000080
ffff880356ec9d28 0000000000000082 ffff880356ec9fd8 00000000000139c0
ffff880356ec8010 00000000000139c0 00000000000139c0 00000000000139c0
ffff880356ec9fd8 00000000000139c0 ffffffff81a13420 ffff88040d346a60
Call Trace:
[] schedule+0x29/0x70
[] schedule_timeout+0x19d/0x220
[] ? enqueue_task_fair+0x64/0x130
[] wait_for_common+0xd4/0x180
[] ? try_to_wake_up+0x2b0/0x2b0
[] ? fdatawrite_one_bdev+0x20/0x20
[] wait_for_completion+0x1d/0x20
[] sync_inodes_sb+0x99/0xd0
[] sync_inodes_one_sb+0x1d/0x30
[] iterate_supers+0xb3/0xe0
[] sys_sync+0x35/0x90
[] system_call_fastpath+0x16/0x1b